|
Documentation
DA Applications
Overview of Sensus DA Applications.
Datasheet
PowerVista™
A powerful and flexible suite of hosted applications.
Datasheet
Reliability Monitoring System
A powerful tool for monitoring power
interruptions, outages and over and under voltages on utility distribution
feeders; and calculating industry-standard power reliability performance
indicators.
Datasheet
DNP-RTM
Enables wireless communications to DNP3, 2179, or C12 compliant IEDs.
Datasheet
User Manual (PDF,
346K)
Current DNP-RTM Integrations
DNP-RTM - MA
Enables wireless communications for up to five DNP3, 2179, or C12 compliant IEDs at each location.
Datasheet
User Manual (PDF,
346K)
Current DNP-RTM Integrations
RTM II
Enables wireless communications to FlexNet, DNP3, MODBUS and C12 compliant IEDs
and communicates using GSM cellular networks or Sensus FlexNet private networks.
Datasheet
Current DNP-RTM Integrations
RTM II - MA
Enables wireless communications for up to five FlexNet, DNP3, MODBUS and C12 compliant IEDs
at each location and communicates using GSM cellular networks or Sensus FlexNet private networks.
Datasheet
Current DNP-RTM Integrations
T646 MicroRTU
Wireless
monitoring and control device with six digital inputs, four analog
inputs and six digital outputs.
Datasheet
Technical Specification
User Manual
(PDF, 442K)
T866 MicroRTU - Flexnet
Wireless monitoring and control device with eight digital inputs, six analog inputs and six digital
outputs and supports communication with several network options, including cellular and FlexNet private radio.
Datasheet
TVM3, TVM1 Voltage Monitor
A low-cost line voltage monitor for single-phase or three-phase power. It reports power outages,
line voltage fluctuations, present voltage status, and monitors the CBEMA Curve.
Datasheet
TVM3 User Manual (PDF, 323K)
TVM1 User Manual (PDF, 320K)
TC012 Capacitor Bank Monitor and Control
The TC012
monitors and controls fixed or switched capacitor banks.
Datasheet
Technical Specification
User Manual (PDF, 388K)
TC032 Capacitor Control
The TC032 monitors and controls fixed or switched capacitor banks and supports
communication with several network options, including cellular and FlexNet private radio.
Datasheet
SCADA-Xchange
Software
that translates data from Telemetric devices into DNP3 and then
communicates it to the utility's SCADA system over a secure TCP/IP
connection.
Datasheet
Network Operations Center(NOC)
The Telemetric Network Operations Center (NOC)
houses the PowerVista hosted applications that enable monitoring and control of remote
assets from any Internet-connected PC in the world.
Datasheet
|